Du har ingen varer i handlekurven.

Krk S12.4-Eu Powered Subwoofer

220 watt active subwoofer featuring 12" woven kevlar woofer
kr 8 195,00
Produsent: KRK
SKU: 9576886
Ikke på lager Ta kontakt med kundesupport for leveringstid
+ -
The S12.4 powered studio subwoofer builds upon KRK’s legacy for sonic accuracy and stellar performance. The custom-made, Kevlar® woofer delivers ultra-tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control, and punch. The four-position selectable crossover lets you adjust the subwoofer setting easily to your existing monitors. Pairing the S12.4 with KRK or another studio monitor delivers an optimized listening and mixing experience with extended low end, while the exclusive bypass-control feature provides full range audio to the monitors without switching off the subwoofer. The powerful S12.4 subwoofer doesn’t just deliver precise, ultra-low bass and a rich feature set: it’s the next dimension in subwoofer performance. S12.4 Features 12" Kevlar® Composite Woofer Bass extension to 26Hz with a max SPL of 119 dB Footswitch control enables/disables sub and crossover filter (footswitch not included) Curved design with front-firing bass port for placement flexibility Powerful, lightweight Class D amplification Optimized four-position crossover control Universal connectivity: XLR, 1/4" TRS, and RCA inputs and outputs Polarity and input sensitivity controls 18 mm reinforced MDF enclosure provide maximum strength and protection Ground lift switch prevents ground loops Configuration Front Loaded, Vented Subwoofer System Type Active Subwoofer Low-Frequency 12" Woven Kevlar® Woofer Frequency Response 32Hz - 139Hz Max Peak SPL 119.9 dB Amplifier Class D Power Output (Continous) 220 Watts @ 1% THD+N @ 44Hz Signal to Noise Ratio 92 dB Amplifier Distortion (THD + N) ≤ 0.3% @-3dB Of Max Power Output 29Hz-97Hz Input Impedance 9.4 KΩ Balanced, 9.2 KΩ Unbalanced Ground Lift On/Off Low Pass Frequency 26Hz-130Hz HPF Bypass With Footswitch Only Footswitch Optional Phase 0 or 180 Degrees System Volume -30 dB to +6 dB Indicators Power/Standby, Sub On/Mute, HPF Bypass Input Connectors XLR L/R, 1/4" TRS L/R, RCA L/R, 1/4" Footswitch LFE Input Balanced TRS Output Connectors XLR L/R, 1/4" TRS L/R, RCA L/R AC Power Input Selectable 110V-120V / 220V0240V Enclosure 18mm Reinforced MDF Finish Black Vinyl Wrap Hardware EVA Isolation Pad Dimensions (H x W x D) 18.11" (460mm) X 15.94" (405mm) X 22.64" (575mm) Weight 66.5 lb. (30.1 kg)
The S12.4 powered studio subwoofer builds upon KRK’s legacy for sonic accuracy and stellar performance. The custom-made, Kevlar® woofer delivers ultra-tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control, and punch. The four-position selectable crossover lets you adjust the subwoofer setting easily to your existing monitors. Pairing the S12.4 with KRK or another studio monitor delivers an optimized listening and mixing experience with extended low end, while the exclusive bypass-control feature provides full range audio to the monitors without switching off the subwoofer. The powerful S12.4 subwoofer doesn’t just deliver precise, ultra-low bass and a rich feature set: it’s the next dimension in subwoofer performance. S12.4 Features 12" Kevlar® Composite Woofer Bass extension to 26Hz with a max SPL of 119 dB Footswitch control enables/disables sub and crossover filter (footswitch not included) Curved design with front-firing bass port for placement flexibility Powerful, lightweight Class D amplification Optimized four-position crossover control Universal connectivity: XLR, 1/4" TRS, and RCA inputs and outputs Polarity and input sensitivity controls 18 mm reinforced MDF enclosure provide maximum strength and protection Ground lift switch prevents ground loops Configuration Front Loaded, Vented Subwoofer System Type Active Subwoofer Low-Frequency 12" Woven Kevlar® Woofer Frequency Response 32Hz - 139Hz Max Peak SPL 119.9 dB Amplifier Class D Power Output (Continous) 220 Watts @ 1% THD+N @ 44Hz Signal to Noise Ratio 92 dB Amplifier Distortion (THD + N) ≤ 0.3% @-3dB Of Max Power Output 29Hz-97Hz Input Impedance 9.4 KΩ Balanced, 9.2 KΩ Unbalanced Ground Lift On/Off Low Pass Frequency 26Hz-130Hz HPF Bypass With Footswitch Only Footswitch Optional Phase 0 or 180 Degrees System Volume -30 dB to +6 dB Indicators Power/Standby, Sub On/Mute, HPF Bypass Input Connectors XLR L/R, 1/4" TRS L/R, RCA L/R, 1/4" Footswitch LFE Input Balanced TRS Output Connectors XLR L/R, 1/4" TRS L/R, RCA L/R AC Power Input Selectable 110V-120V / 220V0240V Enclosure 18mm Reinforced MDF Finish Black Vinyl Wrap Hardware EVA Isolation Pad Dimensions (H x W x D) 18.11" (460mm) X 15.94" (405mm) X 22.64" (575mm) Weight 66.5 lb. (30.1 kg)