Du har ingen varer i handlekurven.

BLACK WEEKEND: Fri frakt hele helgen!

Sontronics Delta 2

Aktiv båndmikrofon - Britisk-produsert - Kanskje markedets beste!
kr 8 790,00
Produsent: Sontronics
SKU: 2976775
Tilgjengelighet: På lager
1Bergen Sentrum
+ -
Phantom-powered ribbon mic for guitar amps & brass A decade after we launched the world’s first ribbon microphone designed specifically to handle higher SPL sources, its successor, the Sontronics DELTA 2, has arrived. The original DELTA, along with our HALO dynamic mic for guitar amps, has become a must-have for many studios and live guitarists, from Bernard Butler to Radiohead's Ed O'Brien, from Steve Stevens to Aerosmith, and when it comes to build quality and perfect sound reproduction, the new DELTA 2 turns the dial up to 11! Like the original, DELTA 2 is not only the perfect partner for guitar amplifiers but also ideal for use with other high-SPL sources, such as trumpet, trombone and tenor sax. Compared to our SIGMA 2, DELTA 2's reduced sensitivity enables it to capture incredibly powerful signals without overloading its internal preamp circuit. Its rugged build and multi-layer baffling make it ready for life on the road as well as in the studio. DELTA 2 sounds even more stunning than the original, capturing amazing clarity and detail in the higher frequencies, together with astonishingly powerful mid and low tones. The DELTA 2 does an incredible job of capturing every element of your guitar sound, whether you’re recording solo parts in the studio or miking up your amp on stage. DELTA 2 captures the true tone of whatever instrument you’re recording, allowing it to sit perfectly in the mix without requiring excessive gain or EQ. Hand-built in the our Sontronics HQ and featuring our own unique circuitry, the DELTA 2 boasts UK-made electronics including a custom-wound premium-quality transformer (made in our hometown of Poole, England), and the same excellent ribbon motor as the original DELTA. The electronics uniquely incorporate RFI (radio frequency interference) filters that filter out unwanted radio frequencies, making DELTA 2 (and our other ribbon mics) even more suited to live use than before. Ours are the only ribbon mics in the world to boast this feature! Our DELTA 2 is supplied with our unique-design shockmount in a rugged ABS flightcase which protects from all the rigours of touring and live use, but also keeps the mic safe and sound between studio sessions. DELTA 2 is the best sounding ribbon microphone you can put in front of your guitar amp, trumpet, trombone or saxophone, and once you’ve heard it, you'll never look back! HIGHLIGHTS: phantom-powered ribbon mic made in the UK designed to handle high SPL rugged build gives great results both live and in the studio unique Sontronics shockmount LIFETIME WARRANTY RECOMMENDED FOR: guitar amps & cabinets brass and saxophone drums Specs: Polar pattern: Figure-of-eight Frequency response: 20Hz - 15kHz Sensitivity: 6mV/Pa -45dB ±1dB (0dB = 1V/Pa @ 1,000Hz) Impedance: ≤200 Ohms Equivalent noise level: 10dB (A-weighted) Max SPL (for 0.5% THD @ 1kHz): 140dB Power: Phantom power 48V required Connector: 3-pin XLR Dimensions: 164 x 72 x 35mm Weight: 470g (906g with shockmount) Comes with: shockmount, flightcase  
Phantom-powered ribbon mic for guitar amps & brass A decade after we launched the world’s first ribbon microphone designed specifically to handle higher SPL sources, its successor, the Sontronics DELTA 2, has arrived. The original DELTA, along with our HALO dynamic mic for guitar amps, has become a must-have for many studios and live guitarists, from Bernard Butler to Radiohead's Ed O'Brien, from Steve Stevens to Aerosmith, and when it comes to build quality and perfect sound reproduction, the new DELTA 2 turns the dial up to 11! Like the original, DELTA 2 is not only the perfect partner for guitar amplifiers but also ideal for use with other high-SPL sources, such as trumpet, trombone and tenor sax. Compared to our SIGMA 2, DELTA 2's reduced sensitivity enables it to capture incredibly powerful signals without overloading its internal preamp circuit. Its rugged build and multi-layer baffling make it ready for life on the road as well as in the studio. DELTA 2 sounds even more stunning than the original, capturing amazing clarity and detail in the higher frequencies, together with astonishingly powerful mid and low tones. The DELTA 2 does an incredible job of capturing every element of your guitar sound, whether you’re recording solo parts in the studio or miking up your amp on stage. DELTA 2 captures the true tone of whatever instrument you’re recording, allowing it to sit perfectly in the mix without requiring excessive gain or EQ. Hand-built in the our Sontronics HQ and featuring our own unique circuitry, the DELTA 2 boasts UK-made electronics including a custom-wound premium-quality transformer (made in our hometown of Poole, England), and the same excellent ribbon motor as the original DELTA. The electronics uniquely incorporate RFI (radio frequency interference) filters that filter out unwanted radio frequencies, making DELTA 2 (and our other ribbon mics) even more suited to live use than before. Ours are the only ribbon mics in the world to boast this feature! Our DELTA 2 is supplied with our unique-design shockmount in a rugged ABS flightcase which protects from all the rigours of touring and live use, but also keeps the mic safe and sound between studio sessions. DELTA 2 is the best sounding ribbon microphone you can put in front of your guitar amp, trumpet, trombone or saxophone, and once you’ve heard it, you'll never look back! HIGHLIGHTS: phantom-powered ribbon mic made in the UK designed to handle high SPL rugged build gives great results both live and in the studio unique Sontronics shockmount LIFETIME WARRANTY RECOMMENDED FOR: guitar amps & cabinets brass and saxophone drums Specs: Polar pattern: Figure-of-eight Frequency response: 20Hz - 15kHz Sensitivity: 6mV/Pa -45dB ±1dB (0dB = 1V/Pa @ 1,000Hz) Impedance: ≤200 Ohms Equivalent noise level: 10dB (A-weighted) Max SPL (for 0.5% THD @ 1kHz): 140dB Power: Phantom power 48V required Connector: 3-pin XLR Dimensions: 164 x 72 x 35mm Weight: 470g (906g with shockmount) Comes with: shockmount, flightcase